HP Switch Lifetime Warranty Ends January 15, 2027: What It Means for Older ProCurve Switches
Short answer: The HP ProCurve lifetime warranty is changing on January 15, 2027. Hewlett Packard Enterprise (HPE) says affected equipment will move to coverage ending five years after its end-of-sale date. Check your exact part number and warranty status, then compare replacement, a spare switch, or a maintenance contract for continued hardware coverage.
Key takeaways
Your switch's part number and recorded coverage matter more than the word “lifetime” on an old brochure.
- January 15, 2027 is the policy change date. It is not automatically every switch's warranty expiration date.
- Check the model's end-of-sale date and your unit's warranty record before assuming a free replacement remains available.
- Our HP/HPE networking maintenance contracts cover listed older E-series and V-series models.
- Match the full part number, choose a coverage level and select your effective start date before buying online.
What is changing with the HP ProCurve lifetime warranty?
According to HPE’s warranty update notice, equipment currently under the HPE Lifetime Warranty moves to a Limited Lifetime Warranty on January 15, 2027. The new duration is tied to the model's end-of-sale date plus five years.
That date is a manufacturer milestone, not the day you bought or installed the switch. An older switch purchased recently therefore needs the same model-specific check as one that has been in your cabinet for years.
What is the Aruba Limited Lifetime Warranty?
HPE calls the new terms the Limited Lifetime Warranty. Instead of lasting for as long as you own the switch, coverage runs until five years after the model's end-of-sale date. According to HPE's notice, replacement hardware under the new warranty ships next business day.
Older documents that describe an HP or Aruba lifetime warranty were written before this change. Check them against the current notice and your own switch's record.
Which HP switches are affected?
HPE's notice lists the affected products. The table below shows common older ProCurve models and their HP part numbers, so you know what to look for on your switch's label.
| Family or familiar name | Example model | HP part number |
|---|---|---|
| HP ProCurve 2510 | 2510-48 | J9020A |
| HP ProCurve 2610 | 2610-24 | J9085A |
| HP ProCurve 2910 | 2910-48G-PoE+ | J9148A |
| HP ProCurve 5400 series | 5406-44G-PoE+-4G v2 zl | J9539A |
| HP ProCurve 5412 | 5412-92G-PoE+-4G v2 zl | J9540A |
For example, HP J9085A identifies a 2610-24, while J9148A identifies a different switch with different capabilities. Power over Ethernet (PoE) supplies power over network cabling; PoE+ identifies an enhanced version. Small form-factor pluggable (SFP) refers to a type of network transceiver connection shown in some model names.
The contract names below use the site's E-series and V-series naming. A V-series listing is not proof that every V-series unit originally had the same ProCurve warranty. Match your label to the contract and check the original terms separately.
How do you find your switch's end-of-sale date?
Use HPE’s networking end-of-sale information and locate the announcement containing your full part number. An end-of-sale date is the date the manufacturer stops offering that model for purchase through the channels described in its notice.
For a concrete example, HPE’s updated 2910al announcement gives May 31, 2014 as the end-of-sale date and includes J9148A. That establishes the model's sales milestone; your unit's entitlement and the 2027 transition still need to be checked. Save both documents with the equipment record.
How do you check your HP ProCurve warranty?
To check an HP ProCurve warranty, record the complete model, part number and serial number, then use HPE’s warranty check. The model identifies the type of equipment; the serial number identifies your individual unit.
- Photograph the label without disconnecting working cables or pulling equipment out unsafely.
- Copy the full J-number or JE-number, including its final letter, and the serial number.
- Enter the requested identifiers in HPE's lookup and save the result with the date you checked it.
- Compare the model against the warranty update and its end-of-sale announcement.
- If the records conflict, ask HPE to confirm your unit's applicable coverage before relying on it.
Keep the purchase invoice nearby, particularly if the switch changed hands. A copied family name, an old packing slip or a reseller's broad warranty statement may not identify the unit accurately enough.
For an office with several switches, make one row per physical device. Note its location and what connects through it, such as phones, wireless access points or the accounting server. This helps you decide which failure would interrupt the most work.
What happens if your switch fails after January 15, 2027?
If your applicable warranty has ended, you should not expect a free replacement under that expired warranty. Whether a particular unit has other active coverage depends on its own record and any separate contract.
In a small office, one switch may connect nearly everyone to shared files, printers and internet access. A fault can therefore interrupt several ordinary tasks at once, even while the server and broadband connection are working normally.
Prepare before a failure: save the switch configuration, label important cables and keep the equipment record somewhere accessible without the office network. Name the person who can identify the device and contact the coverage provider. A written plan is easier to follow than reconstructing the cabinet during an outage.
What are your options for an older HP switch?
You can replace the switch, keep a compatible spare, or buy a maintenance contract for the model you already use. The best choice depends on whether the switch still meets your needs and who will handle a failure.
| Option | When it helps | What to allow for |
|---|---|---|
| Replace the switch | You need different ports, capacity or current software support. | Hardware cost, setup time and a planned changeover. |
| Keep a spare | Someone can configure and install a compatible unit. | Testing, stored configuration, cables and a person available to make the swap. |
| Buy a maintenance contract | The current model still fits and you want defined hardware coverage. | Exact model eligibility, coverage terms and effective start date. |
A spare only helps if it can perform the same job. Compare the number of usable ports, power requirements for connected devices and the connections between switches. A box on a shelf that has never been tested may leave the same work to do during an interruption.
A maintenance contract should also be considered separately from a software upgrade plan. Ask your IT contact to review whether the switch's software and features remain suitable. For a wider comparison, read Network Switch Out of Warranty?.
How much does it cost to keep an older HP switch covered?
As of October 2026, the examples below start at $39.20 a year for 9x5 coverage on an HP E2610-24. Each row lists annual prices for the exact model; NBD means next business day.
| Exact switch model | 9x5 NBD, per year | 24x7 NBD, per year |
|---|---|---|
| HP E2610-24 (J9085A) | $39.20 | $49 |
| HP E2520-24-PoE (J9138A) | $55.20 | $69 |
| HP E2910-48G-PoE+ (J9148A) | $63.20 | $79 |
| HP V1910-24G-PoE (JE007A) | $95.20 | $119 |
| HP V1910-48G (JE009A) | $95.20 | $119 |
| HP E3500-48G-PoE (J8693A) | $100 | $125 |
| HP E2510-48 (J9020A) | $143.20 | $179 |
| HP E5412-92G-PoE+/4G-SFP (J9540A) | $636 | $795 |
| HP E5406-44G-PoE+/4G-SFP (J9539A) | $796 | $995 |
Find your HP switch model in our HP/HPE networking maintenance contracts. Prices are listed on each contract page, and you can buy online with no quote.
Use the part number to compare the table with your label before deciding. A 24-port switch, a powered 48-port switch and a larger modular switch are different purchases even if the badge says HP. For other equipment costs, see How Much Does a Server Maintenance Contract Cost?.
Should you choose 9x5 or 24x7 coverage for a switch?
Choose the coverage level that fits when you need support. Both levels include next business day replacement parts.
9x5 NBD: support during business hours, Monday to Friday, with replacement parts sent for next business day delivery.
24x7 NBD: support 24 hours a day, 7 days a week, with replacement parts sent for next business day delivery.
The full terms for each level are on the contract page.
Our 9x5 versus 24x7 coverage guide can help you compare the options. Think about evening order processing, weekend work and whether someone will be available to report a fault.
Frequently asked questions
A warranty check and an exact model match answer most buying questions. These answers separate the manufacturer change from the steps for arranging a maintenance contract.
Does HP ProCurve still have a lifetime warranty?
The HP ProCurve lifetime warranty is subject to HPE's announced transition on January 15, 2027. Do not assume an old brochure establishes your unit's current entitlement. Check the serial number, full part number and applicable dates, and keep the result with your purchase paperwork before choosing your next step.
When does the HPE lifetime warranty end?
HPE's notice says the change takes effect on January 15, 2027. From then, the warranty on affected products runs until five years after each model's end-of-sale date. Look up your model's end-of-sale date in HPE's end-of-sale information, then check your switch with HPE's warranty check.
What is the HPE Limited Lifetime Warranty?
It is HPE's new warranty for affected networking products. According to HPE's notice, coverage lasts until five years after the model's end-of-sale date, and replacement hardware ships next business day. It is not a promise to replace a switch forever, so check your model's end-of-sale date and keep the result with your equipment record.
How do I check if my HP switch is still under warranty?
Use HPE's warranty check with the identifiers requested for your switch, after copying its serial number and full part number from the label. Save the dated result. If the result differs from an old invoice or warranty statement, get HPE to clarify it before depending on a replacement.
Can I get a maintenance contract for an old ProCurve switch?
Yes, maintenance contracts are listed for the older HP E-series models in the price table, along with the listed V-series switches. Match the full model and part number rather than choosing a nearby family name. Select 9x5 NBD or 24x7 NBD and your effective start date on the contract page.
What happens if my switch fails after January 15, 2027?
The answer depends on the coverage active for your individual switch on the failure date. If the manufacturer warranty has expired, do not count on a free replacement under it. Keep any maintenance contract details, the equipment identifiers and a configuration backup available so the responsible person can act.
How can you keep your HP switches covered?
Find your exact model in our HP switch maintenance contracts, choose 9x5 NBD or 24x7 NBD, and pick your effective start date. buyhardwaresupport.com, run by Top Ten USA in Flanders, New Jersey, sells maintenance contracts for servers, storage and network equipment online, with the price shown on every contract page and no quote needed.
Sources
Manufacturer policy and model details come from these official sources. Contract prices come from the linked contract pages.